BENDIX BW2000 Manual do Utilizador descarregar pdf (Página 19)

5.3.2 Brake Wear Check using Guide Pin (Only for Axial Disc Brakes SB 7541, SB 7551 to SB 7629,

SB 7639 and Radial Disc Brakes SB 7102, SB 7112, SB 7103, SB 7113, SB 7104, SB 7114,

SB 7105, SB 7115, SB 7108, SB7118, SB 7109, SB 7119, SB 7120, SB 7130 - These Callipers do

have the rib in position B (see also Section 5.3.1)

Pad conditions can be visually inspected without

removing the road wheel by noting the positon

of the Floating Pin (4) in the Caliper (1).

If the head of the Floating Pin (4) is inside the

Rubber Bush (6) by a dimension D greater than

0.64in. (18mm), then a more accurate check of the

Pads and Rotor must be made.

If necessary, change the Pads - see Section 6.

B = with rib (see also Section 5.3.1)

C = new condition

D = 0.64in. (18mm) or more, Pads and Rotor must be

checked with road wheel removed

M+P-KN-006

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Sem comentários

BENDIX BW2000 Manual do Utilizador Página 19