BENDIX BW2768 Manual do Utilizador Página 1

Bendix™ BackSpotter® RearCollision Warning SystemUser / Installation GuideBendix™ BackSpotter® Rear Collision Warning SystemBW2768 (Formerly VODR0038)

OperationObject Detection CapabilityBecause of the characteristics of radar, some objects may be detected at a greater distance than others. Obstacle

InstallationRadar Sensor LocationThe Radar Sensor mounting location is key to proper system operation. Ideally, the Sensor should be centered on the r

InstallationSensor Installation1. Select the appropriate sensor mounting location using the mounting bracket supplied.2. The sensor must be mounte

InstallationHarness ExtensionThe interconnect harness provided is 40 feet (14 meters) long, from sensor to rear sensor display. Additional 20-foot (7

InstallationBackup Alarm Control Feature(optional harness required)The Bendix™ BackSpotter® sensor has a built-in relay output that can control a back

InstallationInitial System Power-UpOnce the Bendix™ BackSpotter® system is installed, power should be applied to test correct system operation. Upon p

Installation6. Finally, hold the test target 12 ft. (4 m) from the center of the vehicle rear, aiming the target directly at the sensor. Verify the

InstallationDiagramsRadar Sensor1.385.360.255.242.04 2.043.533.2MADE IN USAFCC ID: OXZSTDPREVIEWThis device complies with part 15 of the FCC Rules.Ope

InstallationRear Sensor Display1.02.01.61.00.3VOLREV<10ftBendix™BackSpotter®14

InstallationInterconnect Harness3214562134DISPLAYSENSORPOWERGROUND1234563421PWRGNDCOMMODU PWRODU GNDREDBLACKPOWERGROUNDODU PWRODU GNDODU COMMN/CBACKSP

General InformationWarnings and Cautions▲WARNING!▲WARNING!Improper use of this system could lead to a serious accident. Read this entire Operating Man

TroubleshootingTroubleshooting16▲WARNING!The vehicle’s ignition must be on and the transmission in reverse for the Bendix™ BackSpotter® system to powe

TroubleshootingOne or more warning LEDs remain on and a tone is heard, but there are not objects behind the vehicle.• Inspect the radar sensor for

Specifi cationsSpecifi cationsTypical Electronics Solid state Sealing Encapsulated to protect from dust, moisture, and vibration. Operating Tempera

Specifi cationsElectricalRegulatory Compliance Input Voltage 9 - 33 volts DC Input Current 0.25 amp maximum (1 amp maximum) Polarity Polarity prot

MaintenanceMaintenanceThe Bendix™ BackSpotter® is intended solely as an aid for an alert and conscientious professional driver. A walk around test sha

BW2768 ©2010 Bendix Commercial Vehicle Systems LLC, a member of the Knorr-Bremse Group All Rights Reserved • 05/10The Roadranger® System features Be

General Information▲WARNING!People’s lives depend on the proper installation of this product in conformance with these instructions. It is necessary t

Table of ContentsWarnings and Cautions ...iFederal Communi

FCC ComplianceFederal Communications CommissionThis device complies with Part 15 of the FCC (Federal Communications Commission) rules. Operation is su

OperationProduct DescriptionThe Bendix™ BackSpotter® system is a standalone vehicle radar system specifi cally designed to alert a driver to objects be

OperationRear Sensor DisplayThe rear sensor display provides the driver with both visual and audible warnings with the use of fi ve (5) LED indicators

OperationSensor DescriptionThe radar sensor transmits and receives a low power 5.8 GHz radar signal. It processes the returned signal to determine if

OperationSystem OperationWhen the vehicle’s transmission is placed in reverse, the system will power up and the rear sensor display will go through a