BENDIX GEN 4 GEN 5 ABS Manual do Operador descarregar pdf (Página 92)

86 NEXIQ Brake-Link™ Bendix

& Eaton

ABS Applications

Chapter

• Diagnosing Gen 4 & 5 ABS

5 The

Valve Selection

screen displays next.

Use the and keys to position the cursor on the desired

valve and press .

Note:

VALVE B

only appears on the

Valve Selection

screen if ABS

is a 2S/2M or 4S/2M configuration.

6 Brake-Link™ executes the valve test. It displays a countdown while the

test is running. When it’s finished, it displays TEST IS COMPLETE;

press to return to the

Valve Selection

screen.

7 Press to return to the

Tests

menu or to return to the

Select Application

screen.

Testing Warning Lamp

Use this option to ensure the ABS Warning Lamp on the outside of the trailer

is functioning properly. This test blinks the lamp 4 times.

Note:

Before the warning lamp is tested, Brake-Link™ detects

wheel speeds to verify that speeds are less than 5 kph. If wheel

speeds are

not

less than 5 kph, the Brake-Link™ displays a mes-

sage indicating that the test cannot be performed.

To test Trailer ABS Warning Lamp

via menu navigation

1 Connect Brake-Link™ to the tractor or trailer and power-up (see “Con-

necting Brake-Link™ Components”, on page 20).

2 Register the ECU (see “Register ECU via menu navigation:”, on

page 28).

VALVE A

VALVE B

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 111 112

Comentários a estes Manuais

Sem comentários

BENDIX GEN 4 GEN 5 ABS Manual do Operador Página 92

Comentários a estes Manuais

Manuais e produtos relacionados com Modulador BENDIX GEN 4 GEN 5 ABS